Skip to content
English
Create Ticket
  • There are no suggestions because the search field is empty.

Common Video Links

    1. Weipu pump -- LINK

    2. Weipu Pelican charge port -- LINK 
    3. BMS reset -- LINK
    4. Hard calibration in Minn Kota head (Figure 8 - FW 2.2.88+) -- LINK
    5. Hard calibration on MotorGuide head (Figure 8 - FW 2.2.88+) -- LINK

    6. Hard calibration on table (Figure 8 - FW 2.2.88+) -- LINK

    7. ProNav Update via Bot Phone 1.504+ -- LINK
    8. MotorGuide Universal Lower replacement -- LINK (addendum on washer install and proper tightening)
    9. MotorGuide thrust inspection -- LINK

    10. MotorGuide twisting wires retrofit -- LINK

    11. MotorGuide Diode Install and Board Inspection -- LINK
    12. MotorGuide 2025 Upgrade install -- LINK1 and LINK2 and Wiring Schematic 
    13. MotorGuide steering motor upgrades -- LINK
    14. Patching a hole -- LINK
    15. Minn Kota Universal Lower install -- LINK (addendum on washer install and proper tightening)
    16. Minn Kota Control Board replacement -- LINK 
    17. Minn Kota replacing an upper -- LINK
    18. Minn Kota twisting wires -- LINK
    19. Minn Kota thrust inspection -- LINK
    20. Minn Kota 2025 Conversion Kit install -- LINK1 and LINK2 and Wiring Schematic 
    21. Minn Kota steering motor top cap gluing -- LINK1 (3M 5200)
    22. Wind Mast install -- LINK
    23. Sunshade Install -- LINK
    24. Cover Drawstring Install -- LINK
    25. Motor Deck Install -- LINK
    26. Deck Strap Install -- LINK
    27. Connect GoPro to Bot Phone -- LINK
    28. Starlink Install -- LINK
    29. Armature Inspection & Test -- LINK
    30. Capsize Preventer Install -- LINK1 (MotorGuide) and LINK2 (Minn Kota)